EX77900 Series
Hardened Grade
- Wide operating temperature range for extreme environments
- Fanless and ruggedized housing
- High shock and electric noise immunity
10GbE Connectivity
- Four 10G SFP+ for connecting the switch to the core network
Lite Layer 3 Routing Features
- Supports static route, RIP v1/v2 and OSPF
- Maximum number of routes in hardware: 64 entries
- Supports Virtual Router Redundancy Protocol (VRRP)
When should you use an Industrial Layer 3 switch?
EtherWAN's EX77900 Series provides a Hardened Full-Gigabit Managed 28-port switching platform that combines the advantages of Layer 3 routing protocols with robust management features and hardened specifications. With support for static routing, Routing Information Protocol (RIP) V1/V2, and Virtual Router Redundancy Protocol (VRRP), these switches deliver outstanding flexibility and security in a high performance and cost-effective package.
The EX77900 Series is equipped with twenty-eight gigabit ports, or a combination of twenty-four Gigabit copper ports and four10G SFP+ for connecting the switch to the core network. Mountable on a 1U rack, the switches are equipped with EtherWAN's Alpha-Ring self-healing technology, providing less than 15ms fault recovery time making it ideal for applications intolerant to interruption.
A broad range of management features and options includes port security, IGMP snooping, port-based VLAN, GARP protocols, link aggregation and ACL, via web browser, telnet, SSH, SNMP, RMON, TFTP, and RS-232 console interfaces. With the hardened specifications, the EX77900 Series is designed to operate at -40 to 75°C in harsh environments, and is IEC 61850 & IEEE 1613 compliant, capable of operating under high EMI environments, making it an ideal choice for mission-critical applications.
EtherWAN — "When Connectivity is Crucial."
Interface
- CLI, Telnet and Web Browser
- SNMP v1/v2c/v3
Management
- Firmware and configuration upgrade and backup via TFTP
- Supports DHCP Server/Client
- RMON (Remote Monitoring)
- Port mirroring: TX/RX and both
- NTP (Network Time Protocol) time synchronization
- IEEE 802.1ab LLDP (Link Layer Discovery Protocol)
- IPv4/IPv6
Security
- MAC address filtering
- Enable/Disable port
- Storm control (Broadcast and multicast types)
- IEEE 802.1x LAN access control
- Remote authentication through RADIUS and TACACS+
- SSH for CLI and Telnet security
- SSL for web security
- ACL
Quality of Service (QoS)
- Priority Queues: 4 queues per port
- Traffic classification based on IEEE 802.1p CoS, DSCP, WRR (Weighted Round Robin) and strict mode
- Rate Limiting (Ingress/Egress)
Layer 2 Features
- Auto-negotiation for port speed and duplex
- Flow Control
- IEEE 802.3x full duplex mode
- Back-pressure half duplex mode
- Redundant Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- EtherWAN's Alpha-Ring network fault recovery (<15ms) and Alpha-Chain
- VLANs
- IEEE 802.1Q Tag VLANs (128 groups, 4096 VID)
- GVRP (GARP VLAN Registration Protocol)
- GMRP (GARP Multicast Registration Protocol)
- Link Aggregation
- Static Trunk (4 groups, support MAC base)
- IEEE 802.3ad Link Aggregation Control Protocol
- IGMP Snooping
- IGMP Snooping v1/v2/v3
Layer 3 Features
- Routing Protocols
- Maximum number of routes in hardware:64 entries
- Static routing
- RIP v1/v2
- OSPF v2
- Routing Redundancy
- VRRP
Technology
- Standards
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX/100BASE-FX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-SX/1000BASE-LX
- IEEE 802.3x Full duplex and flow control
- IEEE 802.1p QoS
- IEEE 802.1Q Tag VLANs
- IEEE 802.1w RSTP
- IEEE 802.1x Port-based Network Access Control
- Forward and Filtering Rate
- 14,880pps for 10Mbps
- 148,810pps for 100Mbps
- 1,488,100pps for 1000Mbps
- 14,880,952pps for 10Gbps
- Packet Buffer Memory
- 12M bits
- Processing Type
- Store-and-Forward
- Auto Negotiation
- Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
- Auto MDI/MDIX
- Address Table Size
- 16K MAC addresses
Power
- Input
- Power input can be configured as:
- • ±48VDC (Terminal Block)
- • 88-300VDC or 100-240VAC (Terminal Block)
- • 100–240VAC (AC Inlet)
- • ±48VDC Redundant (Terminal Block)
- • 88-300VDC or 100-240VAC Redundant (Terminal Block)
- • 100–240VAC Redundant (AC Inlet)
- Power input can be configured as:
- Power Consumption
- 31.08W
Mechanical
- Casing
- Metal Case
- IP30
- Dimensions
- 430 x 375 x 44.2mm (W x D x H)
(16.9" x 14.7" x 1.74")
- 430 x 375 x 44.2mm (W x D x H)
- Weight
- 5.27kg
- Installation
- Rack mounting
Interface
- Ethernet Port
- 10/100/1000BASE-TX: 16 or 24 ports
- 100/1000BASE-SX/LX/BX/SFP: 8 ports
- 10G SFP+: 4 ports
- Console Port
- One DB9 RS-232 port
- USB Port
- One USB Port (Type A connector)
- Alarm Contact
- One relay output with current 0.6A/30VDC
- LED Indicators
- Per Unit: Power 1, Power 2, Alarm
- Per Port: Link/Activity (Green)
Environment
- Operating Temperature
- -40 to 75°C (-40 to 167°F)
- Storage Temperature
- -45 to 85°C (-49 to 185°F)
- Ambient Relative Humidity
- 5% to 95% (non-condensing)
Regulatory Approvals
- ISO
- Manufactured in an ISO 9001 facility
- Safety
- • UL 62368
- EMI
- • FCC Part 15B Class A
- • VCCI Class A
- • EN 61000-6-4
- • EN 61000-3-2
- • EN 61000-3-3
- EMS
- • EN 61000-6-2
- • EN 61000-4-2 (ESD Standards)
- • EN 61000-4-3 (Radiated RFI Standards)
- • EN 61000-4-4 (Burst Standards)
- • EN 61000-4-5 (Surge Standards)
- • EN 61000-4-6 (Induced RFI Standards)
- • EN 61000-4-8 (Magnetic Field Standards)
- Environmental Test Compliance
- • IEC 60068-2-6 Fc (Vibration Resistance)
- • IEC 60068-2-27 Ea (Shock)
- • FED STD 101C Method 5007.1 (Free fall w/package)
- Industrial Compliance
- • IEC 61850-3/IEEE 1613
- • EN 50121-4
- • NEMA TS2
Model
| EX77964-8VZ | 16-port 10/100/1000BASE-TX +8-port 100/1000BASE SFP Combo +4-port 1G/10G SFP+ Hardened Managed Ethernet Switch |
Power Input Interface (Z)
| T | ±48VDC (Terminal Block) |
| W | 88-300VDC or 100-240VAC (Terminal Block) |
| C | 100–240VAC (AC Inlet) |
| TR | ±48VDC Redundant (Terminal Block) |
| WR | 88-300VDC or 100-240VAC Redundant (Terminal Block) |
| CR | 100–240VAC Redundant (AC Inlet) |
Optional Accessory
| EB-232 | Configuration Backup and Restoration Tool for EtherWAN switch with firmware 2.01.1 or above |
Hardened Grade
- Wide operating temperature range for extreme environments
- Fanless and ruggedized housing
- High shock and electric noise immunity
10GbE Connectivity
- Four 10G SFP+ for connecting the switch to the core network
Lite Layer 3 Routing Features
- Supports static route, RIP v1/v2 and OSPF
- Maximum number of routes in hardware: 64 entries
- Supports Virtual Router Redundancy Protocol (VRRP)
When should you use an Industrial Layer 3 switch?
EtherWAN's EX77900 Series provides a Hardened Full-Gigabit Managed 28-port switching platform that combines the advantages of Layer 3 routing protocols with robust management features and hardened specifications. With support for static routing, Routing Information Protocol (RIP) V1/V2, and Virtual Router Redundancy Protocol (VRRP), these switches deliver outstanding flexibility and security in a high performance and cost-effective package.
The EX77900 Series is equipped with twenty-eight gigabit ports, or a combination of twenty-four Gigabit copper ports and four10G SFP+ for connecting the switch to the core network. Mountable on a 1U rack, the switches are equipped with EtherWAN's Alpha-Ring self-healing technology, providing less than 15ms fault recovery time making it ideal for applications intolerant to interruption.
A broad range of management features and options includes port security, IGMP snooping, port-based VLAN, GARP protocols, link aggregation and ACL, via web browser, telnet, SSH, SNMP, RMON, TFTP, and RS-232 console interfaces. With the hardened specifications, the EX77900 Series is designed to operate at -40 to 75°C in harsh environments, and is IEC 61850 & IEEE 1613 compliant, capable of operating under high EMI environments, making it an ideal choice for mission-critical applications.
EtherWAN — "When Connectivity is Crucial."
Interface
- CLI, Telnet and Web Browser
- SNMP v1/v2c/v3
Management
- Firmware and configuration upgrade and backup via TFTP
- Supports DHCP Server/Client
- RMON (Remote Monitoring)
- Port mirroring: TX/RX and both
- NTP (Network Time Protocol) time synchronization
- IEEE 802.1ab LLDP (Link Layer Discovery Protocol)
- IPv4/IPv6
Security
- MAC address filtering
- Enable/Disable port
- Storm control (Broadcast and multicast types)
- IEEE 802.1x LAN access control
- Remote authentication through RADIUS and TACACS+
- SSH for CLI and Telnet security
- SSL for web security
- ACL
Quality of Service (QoS)
- Priority Queues: 4 queues per port
- Traffic classification based on IEEE 802.1p CoS, DSCP, WRR (Weighted Round Robin) and strict mode
- Rate Limiting (Ingress/Egress)
Layer 2 Features
- Auto-negotiation for port speed and duplex
- Flow Control
- IEEE 802.3x full duplex mode
- Back-pressure half duplex mode
- Redundant Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- EtherWAN's Alpha-Ring network fault recovery (<15ms) and Alpha-Chain
- VLANs
- IEEE 802.1Q Tag VLANs (128 groups, 4096 VID)
- GVRP (GARP VLAN Registration Protocol)
- GMRP (GARP Multicast Registration Protocol)
- Link Aggregation
- Static Trunk (4 groups, support MAC base)
- IEEE 802.3ad Link Aggregation Control Protocol
- IGMP Snooping
- IGMP Snooping v1/v2/v3
Layer 3 Features
- Routing Protocols
- Maximum number of routes in hardware:64 entries
- Static routing
- RIP v1/v2
- OSPF v2
- Routing Redundancy
- VRRP
Technology
- Standards
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX/100BASE-FX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-SX/1000BASE-LX
- IEEE 802.3x Full duplex and flow control
- IEEE 802.1p QoS
- IEEE 802.1Q Tag VLANs
- IEEE 802.1w RSTP
- IEEE 802.1x Port-based Network Access Control
- Forward and Filtering Rate
- 14,880pps for 10Mbps
- 148,810pps for 100Mbps
- 1,488,100pps for 1000Mbps
- 14,880,952pps for 10Gbps
- Packet Buffer Memory
- 12M bits
- Processing Type
- Store-and-Forward
- Auto Negotiation
- Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
- Auto MDI/MDIX
- Address Table Size
- 16K MAC addresses
Power
- Input
- Power input can be configured as:
- • ±48VDC (Terminal Block)
- • 88-300VDC or 100-240VAC (Terminal Block)
- • 100–240VAC (AC Inlet)
- • ±48VDC Redundant (Terminal Block)
- • 88-300VDC or 100-240VAC Redundant (Terminal Block)
- • 100–240VAC Redundant (AC Inlet)
- Power input can be configured as:
- Power Consumption
- 31.08W
Mechanical
- Casing
- Metal Case
- IP30
- Dimensions
- 430 x 375 x 44.2mm (W x D x H)
(16.9" x 14.7" x 1.74")
- 430 x 375 x 44.2mm (W x D x H)
- Weight
- 5.27kg
- Installation
- Rack mounting
Interface
- Ethernet Port
- 10/100/1000BASE-TX: 16 or 24 ports
- 100/1000BASE-SX/LX/BX/SFP: 8 ports
- 10G SFP+: 4 ports
- Console Port
- One DB9 RS-232 port
- USB Port
- One USB Port (Type A connector)
- Alarm Contact
- One relay output with current 0.6A/30VDC
- LED Indicators
- Per Unit: Power 1, Power 2, Alarm
- Per Port: Link/Activity (Green)
Environment
- Operating Temperature
- -40 to 75°C (-40 to 167°F)
- Storage Temperature
- -45 to 85°C (-49 to 185°F)
- Ambient Relative Humidity
- 5% to 95% (non-condensing)
Regulatory Approvals
- ISO
- Manufactured in an ISO 9001 facility
- Safety
- • UL 62368
- EMI
- • FCC Part 15B Class A
- • VCCI Class A
- • EN 61000-6-4
- • EN 61000-3-2
- • EN 61000-3-3
- EMS
- • EN 61000-6-2
- • EN 61000-4-2 (ESD Standards)
- • EN 61000-4-3 (Radiated RFI Standards)
- • EN 61000-4-4 (Burst Standards)
- • EN 61000-4-5 (Surge Standards)
- • EN 61000-4-6 (Induced RFI Standards)
- • EN 61000-4-8 (Magnetic Field Standards)
- Environmental Test Compliance
- • IEC 60068-2-6 Fc (Vibration Resistance)
- • IEC 60068-2-27 Ea (Shock)
- • FED STD 101C Method 5007.1 (Free fall w/package)
- Industrial Compliance
- • IEC 61850-3/IEEE 1613
- • EN 50121-4
- • NEMA TS2
Model
| EX77964-8VZ | 16-port 10/100/1000BASE-TX +8-port 100/1000BASE SFP Combo +4-port 1G/10G SFP+ Hardened Managed Ethernet Switch |
Power Input Interface (Z)
| T | ±48VDC (Terminal Block) |
| W | 88-300VDC or 100-240VAC (Terminal Block) |
| C | 100–240VAC (AC Inlet) |
| TR | ±48VDC Redundant (Terminal Block) |
| WR | 88-300VDC or 100-240VAC Redundant (Terminal Block) |
| CR | 100–240VAC Redundant (AC Inlet) |
Optional Accessory
| EB-232 | Configuration Backup and Restoration Tool for EtherWAN switch with firmware 2.01.1 or above |
