EX94000 系列
強固級非網管 4 - 8 埠 10/100BASE-TX +1-2 埠 100BASE-FX 乙太網路交換器
4KV 高突波保護設計
符合 Class I，Division 2 電磁設備認證
彈性光纖介面選擇 (SFP/SC/ST/WDM) 以支援遠距離傳輸
Downloads
EX94000 系列為強固級非網管鋁軌式安裝機型，支援 12 到 48VDC 雙電源備援輸入，具備斷線或斷電告警機制。
EX94000 內建 8 個 10/100BASE 乙太網路連接埠或 RJ45 網路埠及 2 個 100BASE-FX 光纖埠，支援 10/100Mbps 傳輸速率，full/half-duplex auto-negotiation 和 auto MDI/MDIX 選擇，能彈性應用於多種解決方案，產品內建 4kV 突波保護設計功能，符合危險場域安全認證 (Class 1 Div.2)，避免終端設備因突波衝擊受到損害。
EX94000 支援 full wire speed Fast Ethernet throughput，QoS (Quality of Service)，IEEE 802.3az EEE (Energy Efficient Ethernet) 和廣播風暴防護(透過指剝開關設定)，並支援 IEEE 802.3x 自動協商功能、全雙工 / 半雙工流量控制、自動 MDI/MDI-X 跳線偵測、線性、無風扇設計。當電源故障或通訊中斷，繼電器會自動發出警報，協助快速診斷並排除異常。
EtherWAN — "When Connectivity is Crucial."
強固等級設計
- 寬溫操作 ( -40 到 75°C)
廣播風暴防護
- 透過指撥開關設定廣播風暴防護，可彈性搭配工業應用環境
光纖介面連接
- 最高支援 1 個 100BASE-FX 埠，彈性搭配 SC、ST、WDM 或 SFP 組合
高突波防護設計
- 支援 4Kv 突波防護
- 符合危險場域安全認證 (Class 1 Div.2)
高可靠性能
- 無風扇設計
- 全機體固定設計，無可活動零件
Technology
- Standards
- IEEE 802.3u 100BASE-TX/FX
- IEEE 802.3x full-duplex flow control
- IEEE 802.3az Energy Efficient Ethernet
- IEEE 802.1p Quality of Service (QoS)
- Forward and Filtering Rate
- 14,880pps for 10Mbps
- 148,810pps for 100Mbps
- Packet Buffer Memory
- 448K bits
- Processing Type
- Store-and-Forward
- Auto Negotiation
- Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
- Auto MDI/MDIX
- Address Table Size
- 1K MAC addresses
Power
- Input Voltage
- 12-48VDC (Terminal Block)
- Power Consumption
- 12VDC@4.34W, 24VDC@4.57W, 48VDC@6.28W
- Protection
- Reverse Polarity Protection
Mechanical
- Casing Material
- Aluminum Case
- IP Rating
- IP30
- Dimensions
- 50 x 110 x 135mm (W x D x H)
(1.97" x 4.33" x 5.31")
- 50 x 110 x 135mm (W x D x H)
- Weight
- 0.62Kg (1.37lbs)
- Installation
- DIN-Rail (Top hat type 35mm) or Panel mounting
Interface
- Ethernet Ports
- 10/100BASE-TX: 8, 6 or 4 ports
- 100BASE-FX: 0, 2 or 1 ports
- LED Indicators
- Per Unit: Power 1 (Green), Power 2 (Green), Fault (Red)
- Per Port: Link/Activity (Green)
- DIP Switches
- Enable/Disable Port fault alarm
- Enable/Disable Broadcast Storm Protection
- Alarm Contact
- One relay output with current 1A@250VAC
- Supports normal close and normal open
Environmental
- Operating Temp.
- -40 to 75°C (-40 to 167°F)
Tested @ -40 to 85°C (-40 to 185°F)
- -40 to 75°C (-40 to 167°F)
- Storage Temp.
- -40 to 85°C (-40 to 185°F)
- Relative Humidity
- 5% to 95% (non-condensing)
Regulatory
- ISO
- Manufactured in ISO-9001 facility
- EMI
- FCC Part 15B Class A
- VCCI Class A
- EN 61000-6-4
- EN 61000-3-2
- EN 61000-3-3
- EN 55022 Class A
- EMS
- EN 61000-6-2
- - EN 61000-4-2 (ESD)
- - EN 61000-4-3 (Radiated RFI)
- - EN 61000-4-4 (Burst)
- - EN 61000-4-5 (Surge)
Signal ports: ±4kV line-to-earth
DC power ports:
• ±4kV line-to-earth
• ±2kV line-to-line
- - EN 61000-4-5 (Surge)
- - EN 61000-4-6 (Induced RFI)
- - EN 61000-4-8 (Magnetic field)
- EN 61000-6-2
- Safety
- UL 60950
- UL 62368
- Environmental Test Compliance
- IEC 60068-2-6 Fc (Vibration)
- IEC 60068-2-27 Ea (Shock)
- FED STD 101C Method 5007.1 (Free fall w/package)
• Tested with Cross Weight and Drop High standard table
型號
| EX94008-00-1-AA | 8-port 10/100BASE-TX Hardened Unmanaged Ethernet Switch |
| EX94006-00-1-AA | 6-port 10/100BASE-TX Hardened Unmanaged Ethernet Switch |
| EX94026-XY-1-AA | 6-port 10/100BASE-TX +2-port 100BASE-FX Hardened Unmanaged Ethernet Switch |
| EX94014-XY-1-AA | 4-port 10/100BASE-TX +1-port 100BASE-FX Hardened Unmanaged Ethernet Switch |
* DIN-Rail mounting kit included.
100FX Fiber Options (XY)
| 1A | Multi Mode (SC) - 2Km |
| 1B | Multi Mode (ST) - 2Km |
| 2A | Single Mode (SC) - 20Km |
| 2D | Single Mode (ST) - 20Km |
| 2E | Single Mode (SC) WDM-TX: 1310nm/RX: 1550nm-20Km |
| 2G | Single Mode (SC) WDM-TX: 1550nm/RX: 1310nm-20Km |
| V | 100BASE SFP |
* More 100FX Fiber options also available upon request.
Optional Accessories
| KP-AA96-480 | Panel Mounting Kit |
| KR-BKEL900 | Rack Mounting Kit |
| HDR-30-24 | 30W/1.5A DIN-Rail 24VDC Industrial Power Supply |
| HDR-60-24 | 60W/2.5A DIN-Rail 24VDC Industrial Power Supply |
| EDR-75-24 | 75W/3.2A DIN-Rail 24VDC Industrial Power Supply |
EX94000 系列為強固級非網管鋁軌式安裝機型，支援 12 到 48VDC 雙電源備援輸入，具備斷線或斷電告警機制。
EX94000 內建 8 個 10/100BASE 乙太網路連接埠或 RJ45 網路埠及 2 個 100BASE-FX 光纖埠，支援 10/100Mbps 傳輸速率，full/half-duplex auto-negotiation 和 auto MDI/MDIX 選擇，能彈性應用於多種解決方案，產品內建 4kV 突波保護設計功能，符合危險場域安全認證 (Class 1 Div.2)，避免終端設備因突波衝擊受到損害。
EX94000 支援 full wire speed Fast Ethernet throughput，QoS (Quality of Service)，IEEE 802.3az EEE (Energy Efficient Ethernet) 和廣播風暴防護(透過指剝開關設定)，並支援 IEEE 802.3x 自動協商功能、全雙工 / 半雙工流量控制、自動 MDI/MDI-X 跳線偵測、線性、無風扇設計。當電源故障或通訊中斷，繼電器會自動發出警報，協助快速診斷並排除異常。
EtherWAN — "When Connectivity is Crucial."
強固等級設計
- 寬溫操作 ( -40 到 75°C)
廣播風暴防護
- 透過指撥開關設定廣播風暴防護，可彈性搭配工業應用環境
光纖介面連接
- 最高支援 1 個 100BASE-FX 埠，彈性搭配 SC、ST、WDM 或 SFP 組合
高突波防護設計
- 支援 4Kv 突波防護
- 符合危險場域安全認證 (Class 1 Div.2)
高可靠性能
- 無風扇設計
- 全機體固定設計，無可活動零件
Technology
- Standards
- IEEE 802.3u 100BASE-TX/FX
- IEEE 802.3x full-duplex flow control
- IEEE 802.3az Energy Efficient Ethernet
- IEEE 802.1p Quality of Service (QoS)
- Forward and Filtering Rate
- 14,880pps for 10Mbps
- 148,810pps for 100Mbps
- Packet Buffer Memory
- 448K bits
- Processing Type
- Store-and-Forward
- Auto Negotiation
- Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
- Auto MDI/MDIX
- Address Table Size
- 1K MAC addresses
Power
- Input Voltage
- 12-48VDC (Terminal Block)
- Power Consumption
- 12VDC@4.34W, 24VDC@4.57W, 48VDC@6.28W
- Protection
- Reverse Polarity Protection
Mechanical
- Casing Material
- Aluminum Case
- IP Rating
- IP30
- Dimensions
- 50 x 110 x 135mm (W x D x H)
(1.97" x 4.33" x 5.31")
- 50 x 110 x 135mm (W x D x H)
- Weight
- 0.62Kg (1.37lbs)
- Installation
- DIN-Rail (Top hat type 35mm) or Panel mounting
Interface
- Ethernet Ports
- 10/100BASE-TX: 8, 6 or 4 ports
- 100BASE-FX: 0, 2 or 1 ports
- LED Indicators
- Per Unit: Power 1 (Green), Power 2 (Green), Fault (Red)
- Per Port: Link/Activity (Green)
- DIP Switches
- Enable/Disable Port fault alarm
- Enable/Disable Broadcast Storm Protection
- Alarm Contact
- One relay output with current 1A@250VAC
- Supports normal close and normal open
Environmental
- Operating Temp.
- -40 to 75°C (-40 to 167°F)
Tested @ -40 to 85°C (-40 to 185°F)
- -40 to 75°C (-40 to 167°F)
- Storage Temp.
- -40 to 85°C (-40 to 185°F)
- Relative Humidity
- 5% to 95% (non-condensing)
Regulatory
- ISO
- Manufactured in ISO-9001 facility
- EMI
- FCC Part 15B Class A
- VCCI Class A
- EN 61000-6-4
- EN 61000-3-2
- EN 61000-3-3
- EN 55022 Class A
- EMS
- EN 61000-6-2
- - EN 61000-4-2 (ESD)
- - EN 61000-4-3 (Radiated RFI)
- - EN 61000-4-4 (Burst)
- - EN 61000-4-5 (Surge)
Signal ports: ±4kV line-to-earth
DC power ports:
• ±4kV line-to-earth
• ±2kV line-to-line
- - EN 61000-4-5 (Surge)
- - EN 61000-4-6 (Induced RFI)
- - EN 61000-4-8 (Magnetic field)
- EN 61000-6-2
- Safety
- UL 60950
- UL 62368
- Environmental Test Compliance
- IEC 60068-2-6 Fc (Vibration)
- IEC 60068-2-27 Ea (Shock)
- FED STD 101C Method 5007.1 (Free fall w/package)
• Tested with Cross Weight and Drop High standard table
型號
| EX94008-00-1-AA | 8-port 10/100BASE-TX Hardened Unmanaged Ethernet Switch |
| EX94006-00-1-AA | 6-port 10/100BASE-TX Hardened Unmanaged Ethernet Switch |
| EX94026-XY-1-AA | 6-port 10/100BASE-TX +2-port 100BASE-FX Hardened Unmanaged Ethernet Switch |
| EX94014-XY-1-AA | 4-port 10/100BASE-TX +1-port 100BASE-FX Hardened Unmanaged Ethernet Switch |
* DIN-Rail mounting kit included.
100FX Fiber Options (XY)
| 1A | Multi Mode (SC) - 2Km |
| 1B | Multi Mode (ST) - 2Km |
| 2A | Single Mode (SC) - 20Km |
| 2D | Single Mode (ST) - 20Km |
| 2E | Single Mode (SC) WDM-TX: 1310nm/RX: 1550nm-20Km |
| 2G | Single Mode (SC) WDM-TX: 1550nm/RX: 1310nm-20Km |
| V | 100BASE SFP |
* More 100FX Fiber options also available upon request.
Optional Accessories
| KP-AA96-480 | Panel Mounting Kit |
| KR-BKEL900 | Rack Mounting Kit |
| HDR-30-24 | 30W/1.5A DIN-Rail 24VDC Industrial Power Supply |
| HDR-60-24 | 60W/2.5A DIN-Rail 24VDC Industrial Power Supply |
| EDR-75-24 | 75W/3.2A DIN-Rail 24VDC Industrial Power Supply |
