Go To

EDGE 2

工業級 LTE-M/NB-IoT資料擷取傳輸器
MQTT
Azure
AWS
Modbus
Smart Alert
LTE-M
NB-IoT
Converter A/D
不適用美加地區
整合 AWS 和 Azure 雲端服務
多樣性的I/O模組,提供設備整合時的最大彈性
16MB資料儲存空間
智慧資訊處理
VDC 供電時可遠端控制(DO 輸出和 Modbus 控制)
訂購諮詢

益網科技EDGE 2 物聯網設備,透過無線 LPWA 解決方案,可以分別將LTE NB-IoT/Cat-M1 部署在地端設備上,讓使用者用最簡單的方式提高物聯網專案的部署速度,滿足物聯網架構下的無線監控需求。

EDGE 2 只需基本設定,即可快速的將既有的感應器 / 串列設備連接到 NB-IoT/Cat-M1 網路。

EtherWAN — "When Connectivity is Crucial."

 

物聯網雲端連結

    • 採用 MQTT 協定
    • 整合及串聯 AWS 和 Azure 雲端服務
    • 多樣性的I/O模組,提供設備整合時的最大彈性

可靠的傳輸品質

    • 可提供上千筆資料儲存(16MB資料儲存空間);上行資料傳輸排程
    • 整合 10 位元 A/D 轉換器,快速將類比信號轉換為數位資料
    • VDC 供電時可遠端控制(DO 輸出和 Modbus 控制
    • 序列埠支援 Modbus RTU 協同

智慧資訊處理

    • 感應資料可設定觸發喚醒機制
    • 具備閾值觸發 DO 和 MQTT 事件警報

工業等級設計

    • IP65 外殼設計
    • 電池或直流電源輸入
    • 支援-30到70°C(-22 至 158°F)的操作溫度

LTE Cat. NB2/M1 Frequency Band

ModelBand/ChannelRegions
EDGE 2FDD:B1/B2/B3/B4/B5/B8/B12/ B13/B17/B18/B19/B20/B25 /B27/B28/B66/B71/B85
GSM:B5/B8/B3/B2
All Regions (*Worldwide)
 

WAN & Uplink

  • EDGE 2
    •  • Protocol: TCP, UDP, MQTT
    •  • Cloud: AWS, Azure and MQTT based cloud
    •  • Data Security: SSL TLS 1.2
    •  • Connection: By schedule plan
      (per Yearly/Monthly/Weekly/Daily/Hourly or per designated Minutes)
    •  • Data Upload: Multiple servers supported for redundancy,
      re-trial plan for interrupted connection

Field Communication

  • Modbus
    •  • Master for accessing attached Modbus RTU Slaves
      (Up to 8 Modbus devices supported)
  • Data Logging
    •  • By schedule plan
      (per Yearly/Monthly/Weekly/Daily/Hourly or per designated Minutes)

Administration

  • Configuration
    •  • Windows Utility, Console CLI, USB-to-Serial console cable
  • System
    •  • Backup & Restore, Reboot & Reset, Syslog, Upgrade
 

Wireless Interfaces

  • EDGE 2
    • • 1 x LTE Cat. M1/NB2 Module
      • 3GPP, Cat. M1/NB2 with PSM (*Power save mode) supported
  • Data Transmission
    • • Cat. M1: Max. 375Kbps (DL); Max. 375Kbps (UL)
      • Cat. NB2: Max. 32Kbps (DL); Max. 70Kbps (UL)
  • Specification
    • • Max. Output Power: 23dBm
      • Sensitivity:
        -107dBm@Cat M1, 1.4MHz Bandwidth, CE Mode A
        -113dBm@Cat NB2, CE Level 0

I/O Interfaces

  • Analog Input
    • • 3 x AI ports (supports 0-10V/4-20mA)
      • Conversion: 10bit ADC
      • Input Range: 0-10V, or 4-20mA (Dual mode)
      • Resolution: 10mV, or 20uA (with 2-bit hard-wired divider involved)
  • Digital Input
    • • 2 x DI ports (Isolated, supports Pulse Counter, Dry Contact)
  • Digital Output
    • • 1 x DO port (Isolated, Non-Relayed Output, Maximum 24V/300mA)
  • Wake-up Port
    • • 1 x Internal Reed Switch (EDGE 2) and dedicated wake-up port reserved for device wake-up triggering
  • RS-485
    • • Support 8 sets Modbus RTU devices
      • Modbus/RTU read command FC 1,2,3,4 and write command FC 5,6 from MQTT or LoRaWAN

I/O Connectors

  • 2 x M16 waterproof connectors with 2-hole cable gland for wiring the required ports to external sensors/meters

Embedded Antennas

  • EDGE 2 Series
    • • 1 x Internal 2dBi Antenna

Log Storage

  • Data logging (EDGE 2)
    • • 16MB Internal Storage

Power

  • 4000mAh 3.6V Li-SOCL2 battery (Optional), or external 5-12VDC Power Input predefined by Jumper
    • Power Consumption:
    • ON: 1000mWH
    • Sleep: 0.3mWH
    • Sending: 11.25mW / per one time

Mechanical

  • Casing
    • • Plastic (PC, UL-94V2)
      • IP65
  • Dimension
    • • 105 x 55 x 76.47mm (W x D x H); Enclosure only
      • 131.97 x 81 x 76.47mm (W x D x H); Including Cable Gland, Brackets
  • Weight
    • • 0.3Kg (0.66lbs)
  • Installation
    • • Bracket mounting

Environment Limits

  • Operating Temperature
    • • -30 to 70°C (-22 to 158°F)
  • Storage Temperature
    • • -40 to 85°C (-40 to 185°F)
  • Ambient Relative Humidity
    • • 5% to 95% (non-condensing)

Regulatory Approvals

  • Safety
    • • EN 60950-1
  • Emissions/Immunity
    • • CE/NCC/EAC

 

 

 

 

ModelBand/ChannelRegions
EDGE 2FDD:B1/B2/B3/B4/B5/B8/B12/ B13/B17/B18/B19/B20/B25 /B27/B28/B66/B71/B85
GSM:B5/B8/B3/B2
All Regions (*Worldwide)

Included Accessories

  • • Device x 1
  • • Cable Tie for fixing battery x 2
  • • Jumper for AI current mode setting x 3
  • • Water & Dust-proof stopper x 3

Optional Accessory

USB-to-Serial Console CableNoteNote
W96G-1140Y1126USB-to-Serial console cable is an optional accessory purchased separately for utility configuration for EDGE 2 setting and configuration.
W96G-11330Y100ER18505-3.6V-4000mAh battery for EDGE 2 series.