Feature

Overview

Temperature, shock, vibration, and surge all are just “minimum” and “basic” requirements to build hardened network products at EtherWAN. This is not enough to meet our commitment to faultless network connectivity in extreme environments. From switches, converters to Ethernet extenders, EtherWAN provides you with UL1604 class 1 division 2 certified products. All to ensure your network availability even in hazardous locations. When you are fighting in the front end to optimize your infrastructure, we fix your trouble back at home with an accredited standard and impeccable quality.

EX73000 Series 16-port 10/100Base Fast Ethernet with up to 2-port combo Gigabit Hardened Managed Ethernet Switches

• EtherWAN proprietary “ - ring” supports network redundancy; recovery time >15ms
• Protocols : STP, RSTP, MSTP, QoS, IGMP V1, V2 & V3, VLAN Tagging, GVRP, NTP, IEEE802.1 X
• Managed Interface : RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and TFTP Management
• EMI - High ESD Contact : +/-6KV; Air : +/-8KV
• Flexibility: choose fiber optic or opper interface
• Operating temperature Range: -40°C to 75°C (-40°F to 167°F)
• Certifications: UL508, UL1604(ISA 12.1201), NEMA TS1&TS2, FCC Class A, VCCI Class A, CE

EX96000 Series 8-port 10/100Base Fast Ethernet with up to 1-port Gigabit Hardened Managed Ethernet Switches

• Protocols : STP, RSTP, QoS, IGMP, VLAN Tagging, GVRP, IEEE802.1 X
• Managed Interface : RS-232 console, Telnet, SNMP V1 & V2c, RMON, Web Browser, and TFTP Management
• Flexibility: choose fiber optic, copper interface
• Operating temperature Range: -40°C to 75°C (-40°F to 167°F)
• Certifications: UL60950-1, UL1604, NEMA TS1&TS2, FCC Class A, VCCI Class A, CE

EX94000 Series 8 ports 10/100Base Fast Ethernet Hardened Unmanaged Ethernet Switches

• Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
• Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
• Alarms for power and port link failure by relay output
• Redundant power inputs with Terminal Block or DC Jack
• Operating temperature range: -40°C to 75°C (-40°F to 167°F)
• Certifications: UL1604, FCC Class A, VCCI Class A, CE

EL9000 Series 1000Base-T to 1000Base-SX/LX/BX Hardened Media Converter

• DIP switch configuration for "Link-Fault-Pass-Through", link down alarm
• Alarms for power and port link failure by relay output
• Operating temperature range: -40°C to 75°C (-40°F to 167°F)
• Supports DIN-Rail, Panel or Rack Mounting installation
• Certifications: UL60950-1, UL1604, NEMA TS1&TS2, FCC Class A, VCCI Class A, CE

EL900 Series 10/100Base-TX to 100Base-FX Hardened Media Converter

• DIP switch configuration for "Link-Fault-Pass-Through", link down alarm, speed, duplex mode
• Alarms for power and port link failure by relay output
• Operating temperature range: -40°C to 75°C (-40°F to 167°F)
• Supports DIN-Rail, Panel or Rack Mounting installation
• Certifications: UL60950-1, UL1604, NEMA TS1&TS2, FCC Class A, VCCI Class A, CE

ED3141 Series 10/100Base-TX Hardened Ethernet Extender

• Ethernet Extender(RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex 50Mbps communications link over existing copper Telephone wire
• Ten speeds with speed indicator LEDs on front panel of unit, Up to 50Mbps @ about 300meters (984ft.), Down to 1Mbps @ about 1,900meters (6,232ft.)
• Redundant power inputs with Terminal Block and DC Jack
• Operating temperature range: -40°C to 75°C (-40°F to 167°F)
• Certifications: UL508, FCC Class A, VCCI Class A, CE

Related products