Feature

Overview

EtherWAN´s Ethernet Extenders provide efficient Ethernet solutions which extends 10/100Mbps Fast Ethernet to longer distance using existing infrastructure such as phone cable, serial communications cable, or coaxial cable. EtherWAN uses DSL technology making Ethernet connectivity solutions without major infrastructure change. The benefit is quicker installation of any conversion from any legacy communications system to IP communications system without major infrastructure changes.

ED3331 Series 10/100Base-TX Industrial Ethernet Extender Over Coaxial

• Operates transparent to higher layer protocols
• Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation,Auto-MDI/MDIX
• Ethernet Extender Port: Symmetrical on the VDSL, High-speed Full-duplex 85Mbps communications link over existing coaxial cable
• Supports DIP switch to select Local or Remote side
• Ten reference speeds supports Up to 85 Mbps @ about 200 meters (656ft.), Down to 1 Mbps @ about 2600 meters (8,530ft.)
• -10°C to 60°C (14°F to 140°F) operating temperature range
• Supports DIN-Rail, Wall Mounting installation
• Compatible with EMC1600 Media Converter Chassis

ED3171 Series 10/100Base-TX Hardened Managed Ethernet Extender

• Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
• Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
• Operates transparent to higher layer protocols such as TCP/IP, Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
• Ethernet Extender(RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex 50Mbps communications link over existing copper Telephone line
• Support DIP switch to select Local or Remote side
• Ten speeds with speed indicator LEDs on front panel of unit, Up to 50Mbps @ about 300meters (984ft.), Down to 1Mbps @ about 1,900meters (6,232ft.)
• Support external Hardware Watch Dog
• Support Web, CLI, SNMP management Interface
• Link Status (for VDSL, Ethernet), Get/Set IP, Get Rate, Set Rate (for CO site), Get Counter, Get SNR (Local, Remote), SNMP setting (Community), System setting, Reset to Default, F/W upgrade through the management Interface
• Redundant power inputs with Terminal Block and DC Jack, -40°C to 75°C (-40°F to 167°F) operating temperature range
• Supports DIN-Rail or Panel Mounting installation

EMC1600 Series 16-Bay Media Converter Chassis

• House up to sixteen Media Converters (EM1100/EM2100, EM1000/EM2000, EM1000S/EM2000S, EM120, EL100/EL200, EL110/EL210 series, ED3101and ED3331)
• Non-stop operation and minimal downtime
• Hot-swappable: Media Converters and redundant power supply modules
• Redundant 100 ~ 240VAC 50 ~ 60Hz Internal Universal PSU or 48VDC Power inputs
• Power redundancy: The other redundant power supply module is capable of taking over immediately if one of the power supply modules fails
• Load sharing: Two internal power supply modules provided for load sharing purposes
• Power isolation: Media Converter bay power isolation ensures each bay is electrically isolated from each other
• Over current protection: Fuse on PCBA for each Media Converter bay and power supply module
• 0°C to 45°C (32°F to 113°F) operating temperature range
• Metal case, standard 19" rack-mount size, two-unit-height
• Supports Rack Mounting installation

Related products