Go To

EasyLink Series

NEW
Preconfigured IP67 Wireless Bridge Kit
IP67
Available in North America only
Highly Secure
Hardened-Grade for Outdoor & Harsh Environments
Downloads
Inquiry

EtherWAN's EasyLink is a pre-configured point to point (PtP) Bridge kit which allows for connecting remote locations wirelessly up to 2 miles away. EasyLink's simple setup allows you to connect locations by mounting the hardware, powering them on and aligning the units using the built-in alignment LEDs. Each kit contains two paired units that connect automatically using a highly secure, unique, hidden SSID and randomly-generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected.

EtherWAN — "When Connectivity is Crucial."

Easy

  • Mount units to a pole or wall using included mount kit
  • Signal strength LED's for easy alignment
  • Just power and align using supplied PoE injectors and power supplies
  • No technical expertise needed

Highly Secure

  • Encrypted & Authenticated Wireless Connection (WPA2)
  • Every kit has unique SSID and security settings

Hardened-Grade for Outdoor & Harsh Environments

  • Fanless and ruggedized outdoor IP67 enclosure (Rainproof)
  • Wide operating temperature range (-40 to 167°F)
  • Connections up to 2 miles away

What's Included

  • 2 x units preconfigured to connect with optimal performance up to 300Mbps
  • Includes all Mounting Hardware
  • Includes 2 x power supplies and 2 x PoE injectors

Wireless

  • Frequency 5 GHz
  • Max data rate 300 Mbit/s
  • Number of chains: 2
  • Standards 802.11a/n
  • WPA2 Passphrase
  • 256-bit AES-CCM Encryption
  • Dynamic Frequency selection

Layer 2 Features

  • Auto-negotiation for port speed and duplex
  • Redundant Protocols (always enabled)
    • IEEE 802.1D STP
    • IEEE 802.1w RSTP
    • IEEE 802.1s MSTP

Interface

  • Ethernet
    • 10/100/1000BASE-T Passive PoE
  • Wireless
    • 802.11a/n
  • LED Indicators

Technology

  • Standards
    • IEEE 802.3 10BASE-T
    • IEEE 802.3u 100BASE-T
    • IEEE 802.3ab 1000BASE-T
    • IEEE 802.3x full duplex and flow control
    • IEEE 802.1D STP
    • IEEE 802.1s MSTP
    • IEEE 802.1w RSTP
    • IEEE 802.11w Management Frame Protection (MFP)
  • Power
    • PoE in (Passive PoE)
    • PoE in input Voltage 6-30V
    • Max power consumption 10W

Physical

  • Casing Material
    • UV Protected Polystyrene case
  • Dimensions
    • 185 x 185 x 63.5mm (W x D x H)
      7.28" x 7.28" x 2.5"
  • Weight (shipping)
    • 5.3lbs (2.4kg)
  • Installation Type
    • Pole/Wall

Environmental

  • Operating Temp.
    • -40 to 75°C (-40 to 167°F)
  • Storage Temp.
    • -45 to 85°C (-49 to 185°F)
  • Relative Humidity
    • 5% to 95% (non-condensing)
  • Wind Survivability
    • 200km/h
      *Power supply rated 5 to 158°F

Regulatory

  • ISO
    • Manufactured in ISO-9001 facility
  • EMI
    • FCC Part 15B Class A
    • PCC Part 15C

Environmental Test Compliance

  • IEC 60068-2-6 Fc (Vibration Resistance)
  • EN 61000-4-3 (Radiated RFI)

Warranty

Performance

  • VSWR
    • < 2.0@ 5-5.9GHz
  • Dual polarized
    • Horizontal & Vertical
  • High gain
    • Up to 13dBi
  • Front to Back Ratio
    • >20dB
  • Port isolation
    • >30dB

Electrical Specification

  • Frequency Range
    • 5-5.9 GHz
  • Gain
    • 13dBi typ.
  • Polarization
    • Dual linear-V & H
  • Beamwidth Horizontal
    • 37 deg@ -3dB
  • Beamwidth Vertical
    • 37 deg @ -3dB
  • VSWR
    • <2.0 typ.
  • Impedance
    • 50 Ohm
  • RF Interface
    • 2 x SMA Female
  • Front-to-Back Ratio
    • >20dB
  • Port-to-Port Isolation
    • >30dB
 

Gain - Azimuth & Elevation - Port 1

Gain - Azimuth & Elevation - Port 2

3D Gain - Port 1

3D Gain - Port 2

EasyLink Overview

Install in 3 Minutes or Less

Model

EasyLink-300-USWireless Bridge Kit - Two paired Wireless Bridge Units, 2 x 24VDC, 1.5A Power Supplies, 2 x Passive PoE Injectors and 2 x Mounting Kits.
JPole1818" Wall Mount J-Pole
EasyLink-PSU-INJReplacement Power Supply and Gigabit Passive PoE Injector for EasyLink Wireless Bridge Series
Cable 33' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 2525' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 5050' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 150150' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 300330' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
EPOW-24-60-AHardened Power Supply rated for use in temperatures -40 to 167°F
PoEPowerEZPoE Switch to EasyLink Adapter Hardened -40 to 165°F (Eliminates the need for a power supply)

What's in the Box

2 x Paired Easylink Units, 2 x Wall Power Supplies, 2 x PoE Injectors, 2 x Pole Mounting kit, 2 x Wall Mounting Poles, Quick Install Guide (see picture at top)

Unit Connected



Unit Mounted

For US content, please click "Go to US site".

america

Would you like to remember your site selection?

YES NO